EasyGo has combined the sturdiness and durability of conventional reusable bottles in a lightweight single-use version, which comes pre-sanitized out of its compact package. Simply put, to ensure hygiene you don’t need to go through the cumbersome process of cleaning and re-sterilizing conventional old-fashioned bottles anymore.

Its flexibility and air-vent features allow you to use EasyGo in an upright-seated position, reducing the risk of colic and inner ear-infections.

This is a great product for use indoors and outdoors, in all kinds of sanitary conditions, without having to worry about access to clean or boiling water for cleaning all those components that are part of conventional feeding bottles.

EasyGo has just 3 components in its handy reusable storage capsule. It is pre-sanitized and the whole unit including the Nipple (Teat) can be responsibly discarded after use. With old-fashioned disposable bottles only the plastic liners are pre-sanitized and just those liners are discarded after use. This means that all other components of old-fashioned disposable bottles must be cleaned or sterilized for the next use.

Even though plastic liners are sanitized in their original package, the sanitization of the entire box of liners is compromised once the box has been opened.

The preparation of old-fashioned bottles by putting together the plastic liners with the rigid holders and screw-rings before every use is a compromising, complicated and time-consuming process. You need to touch the inner elements of the liners and other parts during this assembly process, which compromises the sanitization of the liners.

EasyGo bottles are produced in an ultra-clean environment and sanitized by a specialized controlled exposure to high-energy photons from an isotope source. This process does not leave residues or alter the structure of the product. It simply renders the product bacteria free by essentially eliminating microorganisms that may naturally occur on any product because of contact or handling during its production, assembly and packing process. It is the same process used for sterilization of medical and surgical products such as syringes, implants, catheters, IV sets, surgical gloves, gauze and many more.

The volumetric graduation on EasyGo bottles is directly etched on the surface of the bottle. It is not marked in color to avoid all sorts of inks, paints, or pigments on the surface of the product; as such colored marking may leach into the food, or rub-off when handled during feeding. Surface integrated etching eliminates the possibility of accidental ingestion of flakes of ink, paint, or pigment that are associated with old-fashioned conventional or disposable bottles.

This is to ensure that the Nipple (Teat) and Cap unit remains on the clean inner surface of the Capsule Lid while preparing and mixing food or formula inside the bottle. The unit is designed to be detached from the Capsule Lid without touching the exposed part of the Nipple (Teat). Once food or formula has been poured into the bottle, the uncontaminated Nipple (Teat) and Cap unit can be assembled onto the bottle without any contact with the exposed Nipple (Teat). The bottle is still as clean as it was when the Capsule was opened.

EasyGo bottles conform to European Standard EN 14350, which is the universally recognized standard for Child Use & Care Articles in the Drinking Equipment category. Apart from conformity with this standard, all materials used in the production of EasyGo bottle components meet or exceed recognized food grade requirements and are completely non-toxic.

Yes, all plastic materials used in the production of EasyGo bottles do not contain Bisphenol-A (BPA) or Bisphenol-S (BPS).

It is recommended to keep the temperature of food or formula served in the bottle at 37–38°C (98.6–100.4°F). It is recommended to check the temperature of the contents by pouring some on the back of your hand before feeding the baby.

As EasyGo bottles are recommended for single-use and don’t need any post-purchase sterilization, there are no concerns about cleaning temperature for this product. Anyway, all the materials used for components of EasyGo bottles easily withstand temperatures up to 105°C (221°F).

The VARYFLO system is designed to provide dynamic adjustment of flowrate to suit individual needs using one single Nipple (Teat). With 3 preset flow speeds, the bottle can be rotated in a way that the preset flow mark on the Nipple (Teat) points upwards, towards the nose, allowing the baby to receive the most comfortably suitable flow from the bottle. A conventional air-vent feature eliminates vacuum, reducing the occurrence of colic.

The SPIROFLO system is designed with unique spiral ribbing inside the Nipple (Teat) that prevents it from collapsing when suction is applied. A combination of conventional air-vents plus an extended valve on the base serves to neutralize air pressure inside the bottle during use. This reduces the occurrence of colic otherwise caused by vacuum. SPIROFLO teats are available with flow-holes in 2 different sizes, for age groups 0m-12m and 12m+, to suit the needs of every growing baby.